Product Introduction

The air-radiator consists of the high effective finned tubes. The product takes use of the steam or fluid media with good heat conductivity, such like oil and water, to transfer the heat into the ambient air to warm it up, or to converse

More...

The tube heat exchangers are designed mainly for the small-medium cold or heat water pumps, widely used in the water cycling heating system, air source water heating or cooling

More...

The corrugation upon the plate is designed for enhancing the heat transfer efficiency. The flow channels formed by the corrugation will cause the drastic turbulence of the water flows upon the plate, though the flow rate is very low

More...

A 10 years old heat supply system covers 4×10 m, and has the heat supply capability of 2.8 MW. In 2005, the system bumped into the problem that the primary side liquid valve is completely opened, and the speed control is invalid

More...

The heat exchanger plays a key part in the petroleum, chemical industry, light industry, pharmacy, and so on. In these fields, the goal of energy transfer is achieved by heating the cold liquid or condensing the hot liquid, and the process

More...

The finned tube refers to such a pipe that got its surface machined and finned. Because of the fins, the contact area of its surface is greatly extended, and the heat exchange efficiency is also greatly enhanced. Therefore, the finned pipe

More...

The heat exchange rate of the fluid inside tube is different from that of the fluid out of tube but within shell. The heat exchange coefficient means the heat volume exchanged between the liquid and shell by decreasing one Celsius

More...

Being experimented, when the contact area of fins is doubled, the heat exchange efficiency can not be doubled, and to converse, will be halved to 0.7 or 0.9. The higher fin will deteriorate

More...

The family of finned tubes is big, and there are still many new members adding in. They can be classified into the following categories

More...

The extruded finned tube is made from the smooth pipe by means of cold extrusion. It is used as a kind of heat exchanger. The traditional finned tube is made of smooth pipe by winding metal belts

More...

Before installing the heat exchanger, please make sure the equipment has a reliable infrastructure, and will never influence the pipelines beneath. The base of the device has two most common types

More...
Main products