Home » Products »
    1. Copper Finned TubeThe fins can be acquired, after the outer surface of a plain tube is roll-formed. This process can help increase the strength of the finned sections, but the plain ends and lands are still soft. High-finned tubes call for those materials that can be cold-worked easily, such as aluminum and copper. Both aluminum and aluminum alloys.
    1. Aluminum Finned TubeThe aluminum finned tube is made of the smooth pipe by means of mechanical rolling. It has no thermal contact resistance, but offers high metallic strength, remarkable thermal and physical shock resistance, as well as the impressive thermal swelling capability. The greatly increased contact area makes much better heat exchange
    1. Copper-Nickel Finned TubeThe BFe10-1-1 copper-nickel finned tube is made by means of the overall extrusion craft. It shows terrific mechanical strength, anti-corrosion and thermal resistance. Being bent into coil for the maximum utilization efficiency is allowed. The corrugated inner pipe wall does help to force the fluid to form the turbulent current, which
    1. Stainless Steel Finned TubeThe stainless steel finned tube is superior to the smooth type in heat dissipation rate. Our product has the efficient thermal exchange surface which is several, even maybe dozens of, times as big as that of the pipe without fins. On the other hand, the corrugated pipe wall plays a part in slow down the flow rate and
    1. Bimetallic Finned Tube (Copper & Aluminum)The bimetallic finned tube is made from the copper pipe and aluminum pipe by means of composition, rolling and extrusion crafts. It is very useful in the heat transfer occasions with low temperature difference. The pipe is finished by the anodizing treatment, and looks lustrous. It also shows perfect corrosion resistance
    1. Bimetallic Finned Tube (Steel & Aluminum)The bimetallic finned tube belongs to the composite type. It is made up of steel pipe and aluminum pipe by means of thermal expansion and spiral extrusion techniques. The overall molded product has no thermal resistance, for the extruded fins are just the parts of the body essentially. By contrast
    1. Finned Tube Coil Heat ExchangersThe finned tube coil heat exchanger can not only serve as tankless water heater, but also be mostly used for the heating of drinking or heating water. Moreover, it is ideal for heating or cooling other liquids. The suitability of material needs to be checked on a case-by-case basis.
    1. 38.5 High Cupronickel Finned TubeThe 38.5 high cupronickel finned tube is adopted by the boiler manufacturers in a large scale. It shows high heat exchange efficiency and long service life, as well as the better chemical corrosion resistance than red copper type. Now, over fifty thousand pieces of finned tube are purchased by the boiler producers in the US annually
    1. 47 High Copper Finned TubeThe 47 high copper finned tube shows terrific heat exchange efficiency and durability. It is purchased by the boiler manufacturers in a large scale, serving as one of the key parts of boiler, and many of them spoke highly of this product
    1. 57 Bimetallic High Finned TubeThe 57 bimetallic high finned tube is the one among our products has the biggest sized fins. It adopts the carbon steel pipe for base and the aluminum pipe for fins, by production means of expansion and overall rolling crafts. It features the extremely high heat exchange rate and long service life. HANGYANG group
    1. 19.05 Medium-High Copper Finned TubeThe 19.05 medium-high copper finned tube is commonly used to make the coiled pipe. It shows terrific mould ability, and can adapt to different working environment. A lot of heat exchange apparatuses need the product, like oil cooler and reduction gears
    1. 25.5 Medium-High Copper Finned TubeThe 25.5 medium-high copper finned tube is applicable to make all kinds of coiled pipes. We can make the product upon requests of customer. The high thermal exchange rate and good mould ability of the product are greatly valued by our German clients, and we have specially design the product for their heating system
    1. 27.5 Medium-High Copper Finned TubeThe 27.5 medium-high copper finned tube has higher heat exchange rate than the 19.05 type and 25.5 type. It has good mould ability to be made into all kinds of coiled tube. Our clients from German who applied our product onto their heating equipment gave us a high praise
    1. 13.5 Low Aluminum Finned TubeThe low aluminum finned tube is suitable for the small sized heater. It is made of aluminum, so it has good cost performance rate. Now it has been applied by the Zhejiang Sanli Purify Equipment Co., Ltd. on their products.
    1. 17.5 Low Aluminum Finned TubeThe 17.5 low aluminum finned tube is designed for the heat exchanger within small space. We adopt the aluminum material to greatly lower the production cost and price, without sacrificing the heat exchange efficiency. Now, this product has been praised by the Zhejiang Sanli Purify Equipment
    1. Copper Finned Tube CondenserThe copper finned tube condenser is made from the low or medium high finned pipe by means of annealing treatment and winding craft. It adapts to the small space well, and can be connected to the pipe fitting easily
    1. Aluminum Finned Tube CondenserThe aluminum finned tube condenser is finished by means of overall extrusion. Its good mechanical property allows it to be bent into various coil pipes. In addition, the inner corrugated wall helps with slowing down the flow rate to enhance the heat exchange efficiency
    1. Copper Fin PlateOur copper fin plate is made of red copper, so it has terrific heat dissipation capability. Its specifications can be customized. Now, the HANGYANG group, a famous domestic oxygen generator manufacturer, adopts the product in a large scale, and spoke highly of it
    1. Aluminum Fin PlateThe aluminum fin plate made by us has been applied in the air separation equipment and heat transfer equipment in abundance. The product is made of high quality aluminum or aluminum alloy, showing the excellent heat dissipation efficiency. The requirements about the customization are acceptable